Dodge Off Road Short Arms Non Adjustable 94-02

Dodge Off Road
Built to Order
(1 review)
24.00 (in)
12.00 (in)
10.00 (in)
Current Stock:
Adding to cart… The item has been added
DOR's industry-best short arms, made from 2" OD 1/4" wall DOM tubing on both upper and lower arms, and with our industry-best greaseable bushings, you simply will not find a better quality short arm anywhere at this price. These are beefier than arms than cost twice as much, and are precision cut, notched, and welded all in a jig for incomparable accuracy. These are the straight arms for 2nd gen trucks, 1994 to 2002. If you have factory wheels and larger/wider tires, you might have some minor rubbing when turned at full lock. These work best with wheels that have more offset than stock, preferably more than 5.5" backspacing (for 8" wide wheels). If you are unsure if your tires will rub or not, it's a good idea to order our bent short arms, which can be seen below in the related products. They will not rub with any wheel or tire configuration that we have seen so far.  All arms are made to push the axle 1/2" forward of the stock location for more tire clearance and better suspension and steering geometry. They are powdercoated gloss black.  You will need to reuse your factory hardware, these bolt right in using the factory cam bolts and control arm hardware.
When listed as in stock, that is only for the stock to 3" length. 
These arms fit the following trucks:
1994-2002 Ram 2500 and 3500 4x4 models
1994-2001 Ram 1500 4x4 model including Off Road Edition


  • 5

    Posted by Brandon Nelson on Aug 11th 2016

    This absolutely dwarf the stock arms in every way. The pictures do these arms no justice, I'll take a picture of them next to stock arms and post it in the forum. Quality is top notch, to say these are the best bang for your buck control arms is an understatement. I would highly recommend to any 2nd get owner, I would say give the bent versions a second look though. 37x12.50's, wheels have 4.75'' of backspacing and are 9'' wide and I don't rub the stock arms, however with how missive these are it wouldn't surprise me if they rub a little. I plan to upgrade to long arms sooner than later, but if I wasn't I would have gone for the bent arms.