Dodge Off Road Johnny Joint High Clearance Short Arms Non-Adjustable 94-02

Dodge Off Road
Built to Order
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
These are the strongest tubular short arms in the industry, with the highest quality weld-on spherical joints available.  These are built identical to our bushing-ended short arms, however we substitute the bushings for Currie Johnny Joints.  Spherical joints are stronger and allow more misalignment than bushings, so these are great for trucks that see a lot of time in the dirt or rocks.  Compare to other arms that use track bar tubing, and ours look like behemoths.  Our upper and lower arms are 2" OD x .250" wall DOM tube and both are bent for tire clearance, to offer the most tire clearance possible while still giving you the strongest short arms possible.  You will not bend or break these arms, and if the joints ever wear out, they are easily rebuildable.  As long as you keep the joints greased up, they should last many years without any issues.  
You will gain 1.5" tire clearance over stock arms using these.  If you are running stock wheels and wider tires, you may still have some minor rubbing, but since we use tube to build the arms, it's really not noticeable other than the powdercoat getting rubbed off.  If you have offset wheels then you shouldn't have any issues, but we have not tested these with every wheel and tire combo out there and cannot guarantee that a particular setup will or will not rub.  If you are having problems with your tires rubbing the control arms you have now, these are a great fix for that problem.  
These arms are made to order and usually take a couple of weeks to build.  All arms are made to push the axle 1/2" forward of the stock location for more tire clearance and better suspension and steering geometry. They are powdercoated semi-gloss black.  You will reuse your factory control arm hardware.  If you have never replaced your factory cam bolts, you'll want to order a set of replacement cam bolts before installing these arms.  You can get inexpensive cam bolts from most parts stores, or from your local Dodge dealership if needed.  We do not sell them.  

These arms fit the following trucks: 

1994-2002 Ram 2500 and 3500 4x4 models
1994-2001 Ram 1500 4x4 model including Off Road Edition