DOR End Links Early 2nd GenDOR's end links are the biggest and strongest Dodge Ram end links ever made. They might even be the biggest end links in the world, period. Other companies have tried to copy them but cannot match our quality or strength. They are 1.25" OD DOM tube that is powdercoated black, with 3/4" shank 4340 chromoly heim joints and 1018 hex tube adapters. These are bigger than a lot of control arms out there! We use 1/4" cold rolled steel pressed and milled brackets, and custom stainless 303 hardware with Grade 8 SAE and Class 10.9 metric hardware to make it all work. We are now making them for 94-97 Ram 1500/2500/3500 4x4 trucks that have the cobra-style sway bar mounts on the axle, but they only work on taller lift heights 5" and up (see info at bottom of listing). If you have a smaller lift and want to run our end links, you'll need to cut the cobra mounts off and weld new tabs on. Then just order the 98-02 end links. This listing is for the bolt-in end links on trucks with the cobra mount.
These are much, much stronger than the cheap factory end links, and will last exponentially longer. We build these to order so we are able to make them in any length from a 2" lift up to whatever you want. By using heim joints on both ends, the end links are adjustable and will also allow your suspension to move a little more without binding up, even with the factory sway bar. If you want to upgrade to our torsion sway bar later on, you can use these end links and save yourself a little money, but again they only work on lift heights 5" and up unless you cut the cobra mounts off and weld new tabs on to convert to the 98+ style.
These fit all 1994 - 1997 Ram 1500 4x4 trucks with at least 7" lift.
These fit all 1994 - 1997 Ram 2500/3500 4x4 trucks with at least 5" lift.