Dodge Off Road Extreme 2nd Gen Torsion Sway Bar 2500/3500

Dodge Off Road
SKU:
1040
Availability:
Built to Order
$799.00
(2 reviews)
Current Stock:
Adding to cart… The item has been added

 

You can purchase the only 2nd gen torsion sway bar on the market.  For those who don't know what a torsion sway bar is, basically it's a much softer version of the factory sway bar.  The smaller diameter allows the bar to twist, which helps soften the front suspension considerably for the first couple inches of suspension travel.  The more the bar twists, the stiffer it gets, so you have a progressive quality that is not available with the much larger stock sway bar.  The stock bar is so thick that it just doesn't move at all, which makes the front axle feel like it's welded to the frame.  Our torsion sway bar fixes that problem, and also gives you a much stronger set of end links - in fact, our end links are the strongest ever made for any Dodge Ram truck.  With this kit, you'll gain a softer ride, more suspension travel without having to unhook the sway bar, and high quality end links that will last the life of your truck in most conditions.  
Let's run through the parts list real quick: 
 
1/4" steel sway bar mounts, cut on our own CNC table, MIG welded and professionally powdercoated black.  These are not like other torsion sway bar mounts you may have seen - ours are much stronger, with the tube that holds the UHMW bushing in place being welded in two tabs rather than one.  This bracket is about twice the size of what other companies make, and offers much more support for your torsion bar. 
 
Specifically tuned sway bar that is matched to the softer spring rates we use on our suspension kits, but it will work with any setup.  This bar is about half the size of the stock sway bar so the rates are much softer, without adding any extra body roll.  The truck will still feel stable, but the suspension will be able to move like it should.  
 
Bent steel arms that are splined to slide over the sway bar, and then bolted in place.  These arms are very thick and very durable, and are bent for clearance so they will bolt right up without modification.  They look similar to other torsion sway bar arms you've seen on Jeeps and newer Dodge trucks, with one exception - we use 14mm bolts to hold the end links in place, not the 1/2" or smaller like everyone else uses.  
 
Finally, our massive Extreme Duty sway bar end links.  These are simply the biggest end links ever made for Dodge trucks, and possibly the biggest end links ever mass-produced for any application.  They are 1.25" OD tube, with 3/4" shank chromoly heims that have a radial static load of over 40,000 lbs each.  These heims are larger than what most companies use on their track bars, but we put them on both ends of our massive end links.  For ease of install, we TIG weld hex tube adapters on the tube so that you can put a wrench on the end links while tightening the jam nuts, without scratching up the end links.  These bolt right up to your axle on 98-02 models (earlier models will need to convert to the 98+ sway bar mounts, we have weld-on tabs available to do this) but you'll need to drill the mounts out with a 14mm or 9/16" drill bit to remove just a little material, since the factory mounts are tapered.  The upper end of the links bolt right to the sway bar arms using the included Grade 8 hardware. 
 
This entire setup bolts right up to your truck and we include all the hardware needed.  The install is very easy and can normally be done in 15 to 20 minutes.  You just unbolt the factory sway bar and end links, drill out your axle mounts, and bolt the new torsion sway bar up.  This is one of the best upgrades you can do for ride quality and in the shortest amount of time, so it's a win-win.   Why do we make everything bigger and stronger than everyone else?  It doesn't cost that much more to build it the right way, and the extra strength means you will have many more years of service out of our parts, which saves you money in the long run.  We build parts for hardcore offroaders, but they work just as well on daily drivers when you want heavy duty truck parts instead of Jeep-sized parts.  
 
The torsion sway bar is designed to work with our steering brace, so there are no clearance issues between the two products.  It may or may not work with other braces, but honestly if you are spending this much money on a sway bar, you shouldn't be running any cheap braces anyway.  Ours is the best so pick one of them up if you don't already have one. 
 
If you have one of our coilover setups, this sway bar is perfect for reducing some body roll without affecting the soft ride or suspension travel that you have.  You'll want to disconnect the end links when you go rock crawling, but for light trail use and driving around town, the torsion sway bar will give you several inches more travel than the stock sway bar allows for. 
 
This product fits 1994-2002 Ram 2500/3500 4x4 trucks only. It will not physically bolt onto 1500 trucks unless you have at least 6" or 7" lift since those trucks sit so much lower.  We have a way to make a 1500-specific setup with custom sway bar arms but it is a completely custom built product and must be ordered over the phone. 
 
Short Description:
DOR Extreme Torsion Sway Bar 2G

Reviews

  • 5
    Worth the wait

    Posted by Charlie on Feb 4th 2019

    It took a while for this to come in, I was pissed about it tbh, but after installation I feel bad for bitching about the wait. The sway bar made my truck feel like a whole new animal, and the quality of the parts is unbelieveable! The damn end links are bigger than my Thoren upper control arms, the heims are huge, everything is just insanely high quality. My only complaint besides the wait time is that the bar itself will rust if not coated, so make sure you paint it after install.

  • 5
    Legitimate Performance!

    Posted by Nas on Jan 8th 2017

    Truth in advertising is the best way I can describe it. After 8 months and 3,500 miles of enjoying this excellent upgrade here is what i have found. Installed on 2001 Dodge 2500 quad cab, LB, diesel, 4x4, 6 spd on, 285/75/R16 Goodyear DuraTrac's This sway bar is built like a tank and beautifully allows the front axle on my constipated front end to now move with the terrain and not toss the cab left and right like it did stock! it worked well at stock height but even better when I put on the 2.75" leveling springs up front. Now the torsion sway bar vertical arms and horizontal bars are nearly a perfect 90 degrees at rest. I have the rear shackle flip kit and flushed the stock rear sway bar. The 7,500b truck (empty) has a noticeable lean to it now on harder turns but controlled. I need to test carefully with a bed full of weight. In retrospect I probable should have hung on to the rear sway bar until tested with a load. The DOR sway bar is mated up with a full frame width steering box brace(original owner) and fits no problem. I have approxiamately 100 miles of fairly rough/intermediate off road terrain for testing so far and absolutely love it, would buy it again in a heartbeat. Worth the price of admission. DOR heavy duty track bar is matched up with it and a Carli bottom half front-diff guard, plenty of clearance and solid handling. Customer service was top notch and accurate build and ship times properly communicated.