DOR 4th Gen 3" Suspension Kit 10-12 2500/3500

Dodge Off Road
Built to Order
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

DOR's 3" Suspension kit for your 3rd gen truck gives you the high quality parts to lift your truck the right way the first time, at a very affordable cost. Too often, Ram truck owners will buy a cheap kit because of the price and then spend the next couple of years replacing all of those cheap parts with good parts. We try to skip that step by giving you something that you can install and enjoy until you sell your truck or go with a bigger lift. Our 3" kit includes:


3" Progressive Rate coil springs, specific to your Hemi or CTD truck,


DOR's fixed length short arms, using 2" OD .250" wall DOM tubing biggest, strongest short arms on the market (upgradeable to offset arms or adjustable arms) which allow your axle to be pushed forward 1/2" of the stock position for better tire clearance and a better ride,


DOR's adjustable track bar, made from 1.5" OD DOM steel tubing with a 7/8" FK heim at the axle and a greaseable and rebuildable Johnny Joint at the frame, so you can center your axle and enjoy increased suspension movement. 


DOR 1" lift shackle for your rear suspension to give you a little extra height without the use of blocks or stiff mini-packs.




You can also add 1.25" OD end links with 3/4" chromoly heims, although they are not necessary for a 3" lift height, but they are a great upgrade if your stock end links are worn out.



Compare our kit to other 3" kits and you'll notice that many don't include upper and lower short arms; we include these on all kits because the axle does get pulled back with a 3" lift and creates an unstable feeling in the steering, plus you have less tire clearance than you really should have. The whole point of lifting the truck is to fit larger tires, so we like to move the axle forward just 1/2" and give you that extra room to fit 35" or 37" tires (depending on your wheel setup).

As of 2021, we no longer provide shocks on suspension kits due to supplier issues and lengthy backorders.  You can source your own shocks from a variety of online retailers, however the wholesale side that we deal with is a constant issue and we're not offering shocks again until we're able to rectify the issue.  


This setup will provide your 2010 - 2012 Ram 2500/3500 4x4 truck with 3" lift up front, 1" lift in the rear, a level stance, a much softer ride than stock, and room for 35" or 37" tires. We only use the highest quality parts, no coil spacers or drop brackets or blocks, so you can install this suspension and enjoy it.  This kit also fits the 2013 Ram 2500 4x4 trucks. 


We also offer the option to upgrade to our Extreme long arm kit, which is designed to work with 3" suspension lift. This option will add an extra 2 to 3 weeks to the build time in most cases.

Short Description:
DOR 3" Suspension 4G