Dodge Off Road Shackle Flip Kit 94-02 Ram 2500/3500

Kit includes two frame brackets, two 3/8" shackles, 1" thick zero rates with Grade 9 center pins, all new Grade 8 hardware for the shackle flip brackets and shackles, and a U bolt flip with 3/8" thick steel U bolt plates and our upgraded 5/8" diameter Grade 9 high strength steel U bolts. Install instructions available in PDF format on our site.  Zero rates are mandatory on all shackle flip kits unless your leaf springs have multiple center pin locations; our kit is the only one that includes the required hardware and is the only kit with adjustable shackles.  We make the best shackle flip kit because we are the only company building them who actually owns and drives Dodge trucks.  That's why you are getting a superior product, rather than having to piece the rest of the kit together if you buy a flip kit elsewhere. 

The U bolt flip is a great way to upgrade your U bolts to the round style where the nuts mount on top of the leaf pack.  This helps with ground clearance and gives you a great place to add our air bag kit or rear air bumps later on if you want. 

This fits all 2nd gen Ram 2500 or 3500 series trucks, from 1994 to 2002, including 2wd trucks.    If you have a 1500 model, see the related products below for your kit - we make the only 1500 shackle flip kit that fits and comes with everything you need! 

Ram 2500 and 3500 models will receive 1.25" lift with the factory block removed, or 5.75" lift if the factory block is retained.

2wd models will receive 5.75" lift (no factory block).

Our shackles are adjustable 1/4" in either direction (3 mounting positions) so you can fine tune your height and also compensate for driver side lean.

If your truck uses the upper overload springs that mount on top of the leaf pack, you will need to either remove those springs and run airbags to achieve the same load capacity, or you will need to fabricate some new frame mounts for the upper overload spring to contact, since the axle will be further away from the frame.  Lower overloads and the spring pack itself will not be affected. 

If you have a 1500 model and are swapping in one ton axles, we can build your shackle flip with the 1/2 ton frame mount and 1 ton shackles. Just let us know in the comments - there is no extra charge for this.

If you are running aftermarket (standard or progressive) leaf packs that eliminate the factory block, we offer a shackle flip setup for those springs. It's the same price and will only lift your truck 1/2" to 1" (adjustable) over what you have already, but will still give you the performance of a shackle flip in conjunction with your aftermarket leaf springs. Contact us prior to ordering if you have any questions, otherwise just put that info in the comments field and we will send you that version.  The regular shackle flip will work on progressive leaf packs but you will end up getting 5.75" lift over what the progressive packs provide.